Product Overview
The TheFaith 72-ounce replacement pitcher is a third-party blender container designed for a specific group of Ninja full-size blender models. It replaces the main blending pitcher while reusing compatible components from the original blender system. The container is made from BPA-free plastic and has an approximately 2.1-liter nominal capacity.
Compatibility depends on more than the blender’s general model family. This pitcher is designed for versions that use a raised six-fin connection at the bottom and the newer extended-rim pitcher configuration. It is intended to work with locking lids that have the corresponding handle extension. The locking lid is not included with the replacement container.
Verified compatible models include BL610, BL610BRN, BL610C, BL710WM, BL710WMC, CO610B, CO650B, CT610, CT610C, and CT611C. The container is dishwasher safe and includes an integrated handle. Because several Ninja blender generations use visually similar pitchers with different bases, rims, and lid systems, exact model and physical-connection verification is important before installation.
Product Information
Identification
| Field | Value |
|---|---|
| Brand | TheFaith |
| Manufacturer | TheFaith |
| Category | Blender Replacement Pitcher |
| UPC | 743636254026 |
| GTIN | 00743636254026 |
| ASIN | B0FX5GLSXF |
Physical
| Field | Value |
|---|---|
| Material | BPA-free plastic |
| Capacity | 72 fluid ounces / approximately 2.1 liters |
| Handle | Integrated ergonomic handle |
Product Identifier Summary
A model number normally identifies a specific product design or appliance configuration. No independently verified model number was established for this replacement pitcher, so none is listed.
An MPN, or manufacturer part number, may be used to distinguish one replacement component from another within a manufacturer’s catalog. No separate verified MPN was established for this item.
A UPC is a standardized retail product identifier used for inventory, cataloging, and barcode scanning. It can distinguish this packaged replacement pitcher from other blender accessories.
An EAN is an internationally used product-numbering format within the broader GTIN system. A separate verified EAN for this configuration was not established.
GTIN is the global product-identification framework that includes UPC and EAN formats. A 12-digit UPC can be represented as a 14-digit GTIN by adding leading zeros.
ASIN is a catalog identifier used within a specific online product database. It identifies a catalog entry and is not a manufacturer-issued compatibility code.
ISBN identifiers apply to books and certain published materials and are not applicable to this blender replacement component.
Common Uses
This product is intended to replace a compatible full-size blender pitcher when the original container is damaged, worn, lost, or otherwise no longer suitable for normal use.
- Replacing a compatible cracked or damaged blender pitcher
- Restoring use of supported blender motor bases when the original pitcher is unavailable
- Preparing smoothies in a compatible blender system
- Blending beverages and liquid recipes supported by the original appliance
- Processing ingredients using the compatible original blade and lid system
- Maintaining a second compatible pitcher for separate food-preparation tasks
Maintenance and Care
The replacement pitcher is identified as dishwasher safe. It can also be washed manually with warm water and dish detergent when appropriate.
Food residue should be removed from the rim, handle area, bottom connection surfaces, and other recessed areas after use. The container should be allowed to dry completely before storage or reassembly.
The pitcher should be inspected periodically for cracks, deformation, damaged connection fins, or wear around the lid-engagement areas. A visibly damaged container should not be operated on a blender base.
Care instructions for blades, lids, and other reused components should follow the documentation for the original blender because those parts are not supplied as part of this pitcher-only configuration.
Safety Information
This product is a replacement container rather than a complete blender. Safe operation depends on correct compatibility with the original motor base, blade assembly, and locking lid.
- Confirm the exact blender model before installing the pitcher.
- Verify that the motor base uses the required raised six-fin pitcher connection.
- Use only a locking lid designed for the extended-rim pitcher configuration.
- Do not operate the blender without the required compatible lid and blade components correctly installed.
- Never reach into an assembled pitcher while the blender is connected to electrical power.
- Disconnect the blender before installing, removing, or inspecting the pitcher and blade assembly.
- Do not use the pitcher if it is cracked, warped, or damaged around the base connection.
- Do not force an incompatible pitcher onto a blender motor base.
- Follow the original blender manufacturer’s limits for ingredients, filling level, and operating duration.
Technical Specifications
| Specification | Value |
|---|---|
| Product Type | Replacement blender pitcher |
| Nominal Capacity | 72 fluid ounces |
| Metric Capacity | Approximately 2.1 liters |
| Material | Plastic |
| BPA-Free | Yes |
| Dishwasher Safe | Yes |
| Base Connection | Raised six-fin configuration |
| Pitcher Rim Type | Extended-rim configuration |
| Compatible Lid Style | Locking lid with handle extension |
| Lid Included | No |
| Integrated Handle | Yes |
| Package Quantity | 1 pitcher |
Product History
This product is a third-party replacement component developed for selected Ninja blender platforms rather than an original blender model. Public documentation does not establish a distinct predecessor, successor, or formal revision history for the pitcher itself.
The compatibility information distinguishes this container as the newer extended-rim configuration with a raised six-fin base. This distinction is important because older or differently configured pitchers within similar Ninja blender families may use another base or lid design.
Key Features
- 72-ounce full-size replacement pitcher
- Approximately 2.1-liter nominal capacity
- BPA-free plastic construction
- Dishwasher-safe container
- Integrated carrying and pouring handle
- Raised six-fin bottom connection
- Extended-rim pitcher design
- Designed for locking lids with a handle extension
- Compatible with a defined group of BL610, BL710, CO610, CO650, and CT610-series blender models
- Pitcher-only package for users retaining compatible original components
Package Contents
- One 72-ounce replacement blender pitcher
The locking lid is not included. Other blender components, including the motor base and blade assembly, are also not included.
Compatibility
Verified compatibility is limited to specific blender models and physical connection designs. The supported models are listed below.
- Ninja BL610
- Ninja BL610BRN
- Ninja BL610C
- Ninja BL710WM
- Ninja BL710WMC
- Ninja CO610B
- Ninja CO650B
- Ninja CT610
- Ninja CT610C
- Ninja CT611C
Model number alone is not the only compatibility check. The original pitcher should also have a raised six-fin base connection, and the blender system must use the newer extended-rim pitcher with a locking lid that includes the corresponding handle extension.
This pitcher should not be assumed compatible with BL660, BL770, Professional Plus BN-series blenders, or other models that are not explicitly identified. Similar 72-ounce capacities do not establish mechanical compatibility.
Frequently Asked Questions
Is this a complete blender?
No. It is a replacement pitcher only. A compatible motor base, blade system, lid, and other required components must already be available.
Does the pitcher include a lid?
No. The locking lid is not part of the identified package configuration.
Why is the six-fin base important?
Compatible versions use a raised six-fin connection on the outside bottom of the pitcher. Other pitcher generations can use different connection geometry and may not engage the motor base correctly.
What does extended rim mean?
The compatible pitcher generation has a rim configuration designed to engage a locking lid with a corresponding handle extension. Earlier pitcher and lid designs may not use this geometry.
Will this fit every Ninja BL610 blender?
Compatibility information identifies BL610 among the supported models, but the physical six-fin base and extended-rim design should also be checked because replacement systems can vary by production version.
Will it fit a Ninja BL660?
BL660 is not included in the verified compatibility list for this pitcher. A replacement designed specifically for that blender family should be identified separately.
Will it fit Ninja Professional Plus blenders?
Professional Plus BN-series models are not included in the verified compatibility list. Their pitchers and connection systems should not be assumed interchangeable with this container.
Can the original lid be reused?
It can be reused only if it matches the required extended-rim pitcher configuration and locking-lid design with the appropriate handle extension.
Can the pitcher go in a dishwasher?
Yes. The replacement pitcher is identified as dishwasher safe. Cleaning requirements for reused blades and lids depend on their original manufacturer instructions.
Is the pitcher made from glass?
No. The verified material is plastic.
Is the material BPA-free?
Yes. Public product information identifies the pitcher material as BPA-free.
Does installation require tools?
No special installation tools are identified for the pitcher. It is installed as part of the compatible blender’s normal pitcher, blade, and lid assembly.
Can an incompatible pitcher damage a blender?
Forcing a container with the wrong connection geometry onto a motor base can prevent correct operation and may damage components. Exact model and base configuration should therefore be verified before use.
How can I find my blender model number?
The model designation is typically printed on the blender’s product identification label. It should be compared directly with the supported-model list rather than relying on the blender’s appearance.
Does a 72-ounce capacity mean all 72-ounce Ninja pitchers are interchangeable?
No. Capacity describes internal volume, not attachment geometry. Different 72-ounce blender pitchers can have different drive connections, rims, locking systems, and lid designs.
Buying Considerations
Compatibility is the primary consideration for this replacement part. Users should confirm both the blender model number and the physical design of the original pitcher before evaluating the replacement.
The raised six-fin base is a critical identifying characteristic. A blender that uses another connection arrangement should not be paired with this pitcher even if its model name or capacity appears similar.
The product is also designed around the newer extended-rim configuration. A compatible locking lid with a handle extension is required, but that lid is not supplied with the pitcher.
The package contains only the container, making it most relevant when the original compatible lid, blade assembly, and motor base remain usable. A damaged blade or missing lid would require separate compatible components.
Published third-party records provide inconsistent physical weight and dimensional figures for this item. Those values are therefore omitted rather than selecting one unsupported measurement.
Customer Feedback Summary
This section is a generalized summary of publicly available customer and product-listing feedback. These observations are not verified technical specifications and do not represent first-hand testing by iGiftCardz.
Positive feedback for replacement pitchers of this type commonly centers on restoring use of an otherwise functional blender when the original container is damaged or unavailable. Users also value dishwasher-safe construction and the ability to reuse an existing compatible lid and blade system.
The most significant recurring issue involves compatibility. Similar Ninja pitchers can differ in base fins, rim shape, lid engagement, and model generation, so buyers sometimes encounter unexpected fit problems when relying only on capacity or exterior appearance.
The absence of a lid is another important limitation for users whose original lid is also damaged or missing. This configuration requires a separate compatible locking lid rather than providing a complete pitcher-and-lid assembly.
Because this is a third-party component rather than an original Ninja pitcher, long-term fit and durability reports can vary between individual users and production batches. Exact model and physical-connection checks remain more reliable than assumptions based on visual similarity.
Related Products
- Replacement locking lid for BL610 and BL710-series extended-rim pitchers — required when the original compatible lid is unavailable.
- 72-ounce replacement pitcher and lid sets for BL610-series blenders — configurations that include both primary container components.
- Replacement pitchers for Ninja BL660 and BL770-series blenders — separate pitcher family using different compatibility requirements.
- Replacement pitchers for Ninja Professional Plus BN750 and BN800-series systems — designed for newer Professional Plus blender platforms.
- Replacement blade assemblies for compatible BL610-series systems — separate components that should be matched by exact blender and pitcher generation.
Last Updated
August 15, 2026
iGiftcardz is an independent product information website. We provide original product research, specifications, compatibility information, model numbers, and buying guides based on publicly available information. iGiftcardz is not affiliated with, endorsed by, sponsored by, or associated with any manufacturer, retailer, or marketplace unless expressly stated. Product names, trademarks, and brand names are the property of their respective owners and are used solely for identification and reference purposes.
Review this product
-
Review this product