Lamicall LAM-STCV01 Car Vent Phone Holder with Metal Hook, Black

Product Overview

The Lamicall LAM-STCV01 is an adjustable smartphone holder designed for attachment to compatible vehicle air vents. It uses a mechanical hook-style vent attachment rather than adhesive or suction mounting. The current configuration incorporates a metal hook, locking structure, adjustable side arms, and a movable lower support intended to accommodate phones with or without thicker protective cases.

The cradle rotates through 360 degrees, allowing a mounted phone to be positioned vertically, horizontally, or at intermediate viewing angles. Its documented smartphone compatibility covers devices approximately 4 to 7 inches in screen size. The mounting mechanism is designed for both horizontal and vertical vent slats when the vent construction provides a suitable surface for the hook.

The main housing uses PC and ABS plastics, while soft silicone is applied to contact areas to reduce direct abrasion against the phone. The vent attachment incorporates metal in its hook mechanism. The holder does not contain charging electronics, magnets, batteries, or a wireless connection. It functions solely as a mechanical support for a smartphone inside a vehicle.

This black configuration measures approximately 5 by 2 by 2 inches and weighs about 0.16 kilograms.

Product Information

Identification

Physical

Product Identifier Summary

Product identifiers help distinguish this vent-mounted holder from other Lamicall mounts that use suction cups, magnetic attachment, charging systems, or different vent mechanisms.

• Model Number: Identifies the manufacturer-defined holder design and is useful for matching support information, product variations, and compatible accessories.
• MPN: A manufacturer part number identifies a specific manufacturer-defined product or package when one has been assigned.
• UPC: The Universal Product Code is a standardized barcode commonly used for inventory management and product matching.
• EAN: The European Article Number is an international barcode identifier used in product catalogs and distribution systems.
• GTIN: The Global Trade Item Number is the broader standardized identification system that can include UPC and EAN formats.
• ASIN: This catalog identifier distinguishes the specific online product record associated with this holder configuration.

Common Uses

This holder is designed to keep a compatible smartphone in a visible position while attached to a vehicle air vent. The phone remains removable from the cradle when it is needed outside the vehicle.

• Holding a smartphone during GPS navigation.
• Positioning a phone for hands-free call interfaces.
• Keeping a phone visible for audio and media controls.
• Mounting a device without attaching adhesive hardware to the dashboard.
• Supporting phones fitted with compatible protective or wallet-style cases.
• Switching between portrait and landscape viewing positions.

Maintenance and Care

Dust and debris can be removed from the holder with a soft dry or lightly dampened cloth. The cradle, silicone contact pads, adjustment mechanism, and vent hook should be kept free of material that could interfere with movement or grip.

The hook and locking mechanism should be checked periodically to confirm that they remain secure. A loose mount should be repositioned or tightened before the vehicle is driven.

Avoid applying solvents or harsh cleaners to the plastic and silicone components. Excessive chemical exposure may affect surface finishes or flexible contact materials.

The holder should be removed if the vent structure becomes damaged or if the mounting mechanism no longer grips securely. Continued use on a loose or broken vent may increase the chance of the phone falling.

Safety Information

• Install the holder only where it does not obstruct the driver’s view of the road.
• Do not position the holder where it interferes with steering, vehicle controls, displays, or normal driving movement.
• Do not install the holder over or directly in front of an airbag deployment area.
• Confirm that the vent hook is securely attached before placing a phone in the cradle.
• Verify that the phone is firmly held by the side arms and lower support before driving.
• Do not adjust the phone or mount while vehicle operation requires the driver’s attention.
• Check the holder after driving over rough surfaces or after significant temperature changes.
• Stop using the mount if the hook, locking mechanism, cradle arms, or vent structure becomes damaged.

Technical Specifications

Product History

The LAM-STCV01 belongs to Lamicall’s range of vehicle smartphone holders. Public product information shows this hook-style vent mount in earlier and updated versions while retaining the same general mechanical mounting concept.

The current version is presented with an updated locking arrangement, wider cradle arms, and compatibility with thicker phone cases. Lamicall also produces separate magnetic, suction-mounted, dashboard-mounted, and wireless-charging vehicle holders that use different attachment systems.

Related products should not be treated as direct revisions of the LAM-STCV01 unless their model designation and mechanical specifications match.

Key Features

• Mechanical metal-hook vent attachment.
• Four-point locking approach for stabilizing the mount.
• Adjustable side arms for different smartphone widths.
• Movable lower phone support.
• Compatibility with many thicker protective cases.
• Soft silicone surfaces at phone contact points.
• 360-degree cradle rotation.
• Portrait and landscape positioning.
• Quick-release mechanism for removing the phone.
• No battery or electrical connection required.

Package Contents

• One Lamicall car vent phone holder.
• One user manual.

Compatibility

The holder is designed for smartphones with screen sizes of approximately 4 to 7 inches. Public compatibility information includes numerous Apple iPhone, Samsung Galaxy, Google Pixel, OnePlus, and other smartphone models.

Compatibility depends on the overall dimensions of the phone and case rather than the phone brand alone. Thick protective cases, wallet cases, and some battery cases can fit within the adjustable cradle, but unusually wide accessories may exceed its available opening.

The vent hook is designed for compatible horizontal and vertical air-vent blades. Circular vents and unusually shaped, deeply recessed, curved, very short, or fragile vent structures may not provide a suitable attachment point.

The holder is mechanical and does not require MagSafe, wireless charging, Bluetooth, USB, or any other electronic standard. A phone can therefore be mechanically compatible regardless of its charging connector or operating system.

Frequently Asked Questions

How does the Lamicall LAM-STCV01 attach to a vehicle?

A metal hook passes behind a compatible air-vent blade while the locking mechanism secures the mount against the vent structure.

Does the holder use adhesive?

No. This configuration attaches mechanically to the vehicle’s air vent and does not require an adhesive pad on the dashboard.

Does it use a suction cup?

No. Suction mounting is not part of the LAM-STCV01 design.

Can the phone be positioned horizontally?

Yes. The rotating joint allows the cradle to be changed between portrait, landscape, and intermediate viewing positions.

Can the holder accommodate a phone case?

It is designed with wider arms and an adjustable lower support for many conventional and thicker cases. Actual fit depends on the combined dimensions of the phone and case.

Will it work with a wallet case?

Many wallet-style cases fall within the documented use of the wider cradle. Thick wallets containing cards or other accessories can increase overall width and should be checked for secure fit.

Does the mount charge the phone?

No. It is a mechanical holder and contains no wired or wireless charging system.

Does the phone need MagSafe?

No. The cradle uses adjustable mechanical arms rather than magnetic attachment.

Can it be installed on a vertical air vent?

Yes. The mounting system is documented for compatible horizontal and vertical vent layouts.

Will it fit every vehicle air vent?

No universal vent holder can be assumed compatible with every vent design. Vent depth, blade shape, spacing, movement, and structural strength affect installation.

Can the phone be removed quickly?

Yes. The cradle incorporates a release mechanism that allows the gripping arms to open for phone removal.

How should the mount be cleaned?

A soft dry or lightly dampened cloth can be used to remove dust from the housing and silicone contact surfaces. Harsh solvents should be avoided.

What should be checked if the mount starts moving?

Inspect the hook position, locking mechanism, vent blade, and rotating joint. The mount should be readjusted before continued driving if any connection becomes loose.

Can the mount damage an air vent?

Any vent-mounted accessory places some mechanical load on the vent structure. Installation should be avoided on damaged, weak, unusually thin, or incompatible vent blades.

Can the mount be used while the heater is running?

The mount is positioned directly at the air vent, so it may be exposed to heated airflow. The documented PC and ABS construction is designed to tolerate automotive temperature conditions, but excessive heat exposure should still be avoided where practical.

How can the exact version be identified?

Check the LAM-STCV01 model designation, black color, hook-style vent mechanism, product documentation, and catalog identifier. Other Lamicall car mounts can look similar while using different mounting systems.

Buying Considerations

Vent design is the main compatibility factor for this product. The hook must reach behind a suitable vent blade while allowing the mount to sit securely against the front of the vent.

Phone dimensions should be considered together with the installed case. Thick cases increase overall width and depth, while wallet and battery cases can change the balance of the mounted device.

A vent-mounted design places the phone near the vehicle’s airflow. This positioning differs from dashboard or windshield mounts and may affect airflow from the selected vent.

The LAM-STCV01 does not provide charging. Drivers who require integrated wireless power should distinguish this mechanical cradle from Lamicall models containing charging hardware.

Placement should also be evaluated for driver visibility and airbag safety. A mount should not block important controls, instrumentation, or areas designed for airbag deployment.

Customer Feedback Summary

This section provides a generalized summary of recurring themes reported in publicly available customer feedback. These observations represent individual user experiences and are not verified product specifications.

Frequently favorable comments focus on the hook-style attachment remaining more secure than simple friction clips on compatible vents. Users also commonly report that the adjustable cradle accommodates phones fitted with relatively bulky protective cases.

The ability to rotate the phone between portrait and landscape orientations is another recurring positive theme. Public feedback also frequently mentions straightforward installation and the convenience of the mechanical release mechanism.

Reported limitations are closely related to vehicle vent design. Some vents do not provide enough depth or a suitable blade shape for the hook to attach correctly. Users also note that heavier phones can place additional stress on flexible vent assemblies and that the holder can partially restrict airflow from the vent where it is installed.

Related Products

• Lamicall magnetic car vent phone mounts.
• Lamicall MagSafe-compatible vehicle mounts.
• Lamicall suction-cup dashboard phone holders.
• Lamicall windshield smartphone mounts.
• Lamicall wireless-charging car phone holders.
• Mechanical vent mounts for 4 to 7-inch smartphones.

Last Updated

August 16, 2026